Network Audio - Denon S-52 Owner's Manual

Network Audio

[Wired LAN]
Modem
Internet radio
To WAN side
Router
To LAN port
To LAN port
[Wireless LAN]
Modem
Internet radio
To WAN side
Router with access point
Required System
n Broadband Internet Connection
A broadband line connection to the Internet is required in order to
use the S-52's Internet radio function.
Computer
n Modem
This is a device that is connected to the broadband line to
communicate with the Internet.
n Router
When using the S-52, we recommend you to use a router equipped
with the following functions:
• Built-in DHCP (Dynamic Host Configuration Protocol) server
This function automatically assigns IP addresses on the LAN.
• Built-in 100 BASE-TX switch
When connecting multiple devices, we recommend a switching
LAN port/
hub with a speed of 100 Mbps or greater.
Ethernet port
n Ethernet Cable (CAT-5 or greater recommended)
The S-52 does not come with an Ethernet cable.
Purchase a cable of the required length.
n Computer
A computer with the following specifications is required to operate
the music server:
• OS
Windows® XP Service Pack2, Windows Vista
• Software
.NET Framework 1.1, Windows Media Connect (Windows XP),
Windows Media Player Ver.11
• Internet browser
Microsoft Internet Explorer 5.01 or later
Computer
• LAN port
• 300 MB or more free disk space
b Free space is required to save music files. The following sizes are
approximate.
Format Bit rate
128 kbps
MP3 / WMA
192 kbps
256 kbps
MPEG-4 AAC
392 kbps
WAV (LPCM) 1400 kbps
Wireless LAN rod 1080 kbps
FLAC
antenna (Supplied)
Turn right
• Depending on the server, video files may be displayed, but they
cannot be played on the S-52.
• For connections to the Internet, contact an ISP (Internet Service
Provider) or a computer shop.
• The types of routers that can be used depend on the ISP . Contact an
ISP (Internet Service Provider) or a computer shop for details.
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
n Others
• If you have an ISP contract for a line on which network settings are
made manually, make the settings at "Network Setting" (vpage
12, 13).
• When using a broadband router (DHCP function), the S-52 makes
the network settings automatically, so there is no need to make
them yourself.
• If connecting the S-52 to a network with no DHCP function, make
the settings at "Network Setting" (vpage 12, 13).
• The S-52 is not compatible with PPPoE. A PPPoE-compatible router
is required if you have a contract for a line of the type with which
the PPPoE is set.
• Depending on the ISP with which you have your contract, it may
be necessary to make proxy server settings to use the Internet
radio function. If you made proxy server settings on the computer
to connect to the Internet, make the same proxy server settings on
the S-52.
• The S-52 uses the DHCP and Auto IP functions to make the network
settings automatically.
n Ethernet Cable (CAT-5 or greater recommended)
No Ethernet cable is included with the S-52. Procure a cable with
Per minute Per hour
the necessary length.
Approx. 1 MB Approx. 60 MB
NOTE
Approx. 1.5 MB Approx. 90 MB
Be sure to use a shielded type cable for USB/Ethernet connections.
Approx. 2 MB Approx. 120 MB
Depending on the connected computer/router, there may be much
Approx. 3 MB Approx. 180 MB
noise generated from the cable.
Approx. 10 MB Approx. 600 MB
Approx. 7 .7 MB Approx. 464 MB
6
(1 MB = 10 bytes)
ENGLISH