Table of Contents
Advertisement
Tuning in DAB Stations
1
<Multi Jog>
Either turn
or press
<SOURCE>
pressing
to select "DAB" then press
ENTER
[RADIO]
, or press
.
Automatically begin the DAB search operation.
b The display changes as follows each time you press a remote control
button.
DAB
FM
AM
2
Press
8
or 9 to select the desired broadcast
station.
b The broadcast stations are displayed in the order in which they
were scanned.
Listening to DAB Stations Registered in Your Favorites
and Presets
• DAB stations can be stored in the favorites and played.
• DAB stations can be stored in the preset memory and played in the
same way as FM/AM stations.
・ "Presetting Radio Stations" (vpage 20)
・ "Listening to Preset Stations" (vpage 20)
・ "Favorite" (vpage 27)
n Viewing track information during reception
Press ENTER while receiving a digital broadcast to display the name
of the artist, album, etc., of the track currently being broadcast.
Either turn <Multi Jog> or press [ui] to select the information.
n Canceling track information
Press ENTER again to return to the previous display.
b Information is only displayed when it is available.
Switching the Reception Information for
the Currently Tuned in DAB Station
8 9
after
1
Perform steps 1 to 2 under "Tuning in DAB stations"
to tune in a DAB station.
2
ENTER.
Press
b The display switches as shown below each time the button is
pressed.
q Station Name :
The service station name is displayed.
w Program Type :
The category of the tuned in station is displayed.
e Ensemble Name :
The ensemble name is displayed.
r Signal Quality :
The reception signal sensitivity is displayed (0 to 100).
b If the reception signal sensitivity is 80 or greater, the
program can be received without noise.
t Audio Information :
The mode of the currently tuned in station and its bit rate are
displayed.
Making the DAB Settings
1
Set the band to "DAB", then press
2
<Multi Jog>
Either turn
or press
menu to be set.
3
ENTER
Press
.
[Selectable items]
Tuning Aid
:
The reception sensitivity of the currently tuned in frequency is
displayed.
b The program can be received without noise when the cursor move
to the right of the sensitivity display.
Station Order
:
T
he service list is created with the auto scan function.
MULTIPLEX
ALPHANUMERIC
(In order of frequency)
(In alphabetical order)
DRC (
)
Dynamic Range Control
:
Off
1/2
1
Auto Scan
:
Broadcast stations are automatically scanned and their frequencies
are stored in the memory.
Start :
Auto Scan Starts.
CANCEL :
Auto Scan Cancel.
b If "NO STATION" is displayed when auto scanning finishes, check
the antenna's connection (vpage 8).
Scan Area
:
Select the area to be auto scanned.
ALL :
ALL BAND III : 5A to 13F
UK ONLY : 11B to 12D
DAB INITIALIZE
:
When the "DAB Initialize" procedure is performed, all the preset
memory settings for the stations and DABs are reset.
ENGLISH
[PLAY MODE]
.
[ui]
to select the
Advertisement
Table of Contents
