Jenn-Air CP240B Repair Manual page 10

Grilling
The grill accessory consists of two black grill grates, a grill element and a grill liner pan.
To Install Grill
1. Before installing grill components, be certain surface controls are OFF.
2. Place the grill liner into an empty basin pan with the opening next to the terminal
block. The grill liner pan must be used since it supports the grill element.
3. Position the grill element with the terminal pLugtowards the terminal receptacle.
Slide the element towards the receptacle until the terminal plug is completely
engaged. The grill element should rest flat on the side ledges of the grill liner pan.
4. Place the black grill grates on the top of the basin pan.
To Remove Grill
1. Remove grill components once they are cool. Be sure controls are OFF.
2. TOremove grill element, lift the side at the ventilation chamber until the top of the
element is about 112inch above the cooktop. (NOTE: Lifting the element too high
while still engaged in the receptacle could damage the terminal plug.) To
disengage terminal, slide away from the terminal receptacle. Lift out when fully
unplugged,
Grill Covers
1. Grill covers can be used to cover the grill, when not in use, or an empty basin pan.
2. To remove the gdll covers, push down on front or rear side. The opposite side
will lift slightly for easy removal.
10