Cisco Aironet 1300 Series Quick Start Manual page 21

Setting
Host Name
Configuration
Server
Protocol
IP Address
IP Subnet
Mask
Quick Start Guide Cisco Aironet 1300 Series Access Point
Description and Default
A name for the bridge that identifies it on your network.
Default: ap
Specifies how the bridge obtains an IP address.
Options: DHCP or Static IP
Default: DHCP
Option Description
DHCP IP address is automatically assigned by
network's DHCP server.
Static IP The bridge uses an IP address you enter in
the IP Address field.
Assigns or changes the bridge's IP address. If DHCP is
enabled, leave this field blank.
Default: Depends on Cisco IOS Release in use. See
"Important Information" section on page 1 for additional
information.
Identifies the subnet on which your bridge resides.
Provided by your network administrator.
If DHCP is enabled, leave this field blank.
21