Chicco PD348997B Assembly Instructions Manual page 6

CHICCO
1
CLICK
3
Car Seat Adapter Installation:
1 Insert Adapter Brackets into the corresponding mounting
brackets on your stroller. The Adapter Brackets are secure
when they click into place.
NOTE: Left and right are determined by standing in front of and
facing the stroller and each Adapter Bracket is labeled
with an L or an R for your convenience.
2 Insert the U-shaped bar (A) into the openings on the front of
the adapter brackets. The A bar should be inserted all the way
so that the stoppers hit the plastic adapter brackets.
3 From the rear of the stroller, connect the second U-shaped
bar (B) by inserting it over the ends of the already installed
U-shaped bar (A) until it clicks into place and the green
indicator on top is displayed entirely.
2
4
6
CLICK