ALDI V4916DSO364 User Manual page 23

1. Push the SET button
2 seconds to switch to the configuration mode.
The indicator for the time mode 12 hour (12 hr)
or 24 hour (24 hr) will blink.
2. Push the MEM button
time mode. Push the SET button to save the se-
lected time mode. If the 12 hour indicator
(12 hr) is configured, the symbol PM will appear
on the display when displaying the time.
3. The indicator for hours will blink on the display
and with the MEM button, you can perform the
setting from 1 – 12 or 1 – 24 depending on the
previously selected time mode. You can then
save the selected value with the SET button.
4. Now, the indicator for minutes will blink on the
display and with the MEM button, you can set a
value from 00 – 59 and save the selected value
with the SET button.
5. Now, the indicator for the calendar year will
blink on the display and with the MEM button,
you can set a value from 2001 – 2099 and save
the selected value with the SET button.
6. Now, the indicator for the month will blink on
the display and with the MEM button, you can
set a value from 1 – 12 and save the selected val-
ue with the SET button.
7. Now, the indicator for the weekday will blink
on the display and with the MEM button, you
can set a value from 1 – 31 and save the selected
value with the SET button.
Basic functions
3
down for approx.
9
to select the desired
23