Information Menu - BenQ HT8050 User Manual

Hide thumbs

Table Of Contents

Table of Contents

With the control keys on the projector and remote control locked, you can prevent

your projector settings from being changed accidentally (by children, for example).

When the Key Lock is on, no control keys on the projector will operate except

To release panel key lock, press and hold

Key Lock

remote control for 3 seconds.

If you turn off the projector without disabling panel key lock, the projector will still be in locked

status the next time it is turned on.

Selects to turn off the LED warning lights. This is to avoid any light disturbance

LED Indicator

when viewing images in a dark room.

• Wired LAN: See

• AMX Device Discovery: When this function is On, the projector can be

detected by AMX controller.

Network

Settings

• Network Standby: When this function is On, the projector is able to provide

the network function when it is in standby mode.

• MAC Address: Displays the mac address for this projector.

Returns all settings to the factory preset values.

Reset All

Settings

The following settings will still remain: Picture Mode, User Mode Management, Brightness,

Contrast, Color, Tint, Sharpness, Advanced, Projector Position, Source Rename,

Password, and Network Settings.

The ISF calibration menu is password protected and only accessible by authorized

ISF calibrators. The ISF (Imaging Science Foundation) has developed carefully

crafted, industry-recognized standards for optimal video performance and has

implemented a training program for technicians and installers to use these

standards to obtain optimal picture quality from BenQ video display devices.

Accordingly, we recommend that setup and calibration be performed by an ISF

ISF

certified installation technician.

For more information, go to www.imagingscience.com or contact the dealer or retailer from whom

you purchased the projector.