BenQ HT8050 User Manual page 25

• Rename User Mode
Select to rename the customized picture modes (User 1 or User 2). The new
name can be up to 9 characters including English letters (A-Z, a-z), digits (0-9), and
space (_).
1. Go to PICTURE > Picture Mode.
User Mode
2. Press
Management
3. Press
(Continued)
4. Press
5. Use / / /
6. When done, press OK and BACK to exit.
The higher the value, the brighter the image. Adjust this control so the black areas
Brightness
of the image appear just as black and that detail in the dark areas is visible.
The higher the value, the greater the contrast. Use this to set the peak white level
Contrast after you have previously adjusted the Brightness setting to suit your selected input
and viewing environment.
Lower setting produces less saturated colors. If the setting is too high, colors on
Color
the image will be overpowering, which makes the image unrealistic.
The higher the value, the more greenish the picture becomes. The lower the value,
Tint
the more reddish the picture becomes.
Sharpness The higher the value, the sharper the picture becomes.
• Gamma Selection
Gamma refers to the relationship between input source and picture brightness.
Advanced
/ to select User 1 or User 2.
to highlight User Mode Management, and press OK. The User
Mode Management page is displayed.
to highlight Rename User Mode and press OK. The Rename
User Mode page is displayed.
to select desired characters.
• 1.6/1.8/2.0/2.1/BenQ: Select these values according to your preference.
• 2.2/2.3: Increases the average brightness of the picture. Best for a lit
environment, meeting room or family room.
• 2.4/2.5: Best for viewing movies in a dark environment.
• 2.6/2.8: Best for viewing movies which are mostly composed of dark scenes.
High Brightness
Low Contrast
1.6 1.8 2.0 2.1 2.2 2.3 2.4 2.5
Low Brightness
High Contrast
2.6 2.8 BenQ
Menu operation 25