Display Menu; Installation Menu - BenQ HT8050 User Manual

DISPLAY menu

Displays the position adjustment page. To move the projected image, use the
Image
directional arrow keys. This function is only available when a PC signal (analog RGB)
Position
is selected.
Conceals the poor picture quality in the four edges.
Overscan
The greater the value, the more portion of the picture is concealed while the
Adjustment
screen remains filled and geometrically accurate. Setting 0 means the picture is
100% displayed.
• H. Size: Adjusts the horizontal width of the image.
•
PC Tuning
• Auto: Adjusts the phase and frequency automatically.
These functions are only available when the PC signal is selected.

INSTALLATION menu

Projector The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Position
Adjusts the image size and focus and check that the
projected image is free from distortion.
Test Pattern
There are several options to set the image's aspect ratio depending on your input
signal source.
• Auto: Scales an image proportionally to fit the
• 4:3: Scales an image so that it is displayed in the center
Aspect Ratio
• 16:9: Scales an image so that it is displayed in the
• 2.35:1: Scales an image so that it is displayed in the
28 Menu operation
Phase: Adjusts the clock phase to reduce image
distortion.
Choosing a location on page
projector's native resolution in its horizontal or vertical
width.
of the screen with a 4:3 aspect ratio.
center of the screen with a 16:9 aspect ratio.
center of the screen with a 2.35:1 aspect ratio.
11.
15:9 picture
4:3 picture
16:9 picture
16:9 picture