Preparing For Use; Machine Packaging; Machine Installation - Saeco HD8766 User Manual

ENGLISH
6

PREPARING FOR USE

Machine Packaging

The original packaging has been designed and constructed to protect the
machine during transport. We recommend keeping the packaging material
for possible future transport.

Machine Installation

1 Remove the drip tray with grill from the packaging.
2
Remove the machine from the packaging.
3
For best use, it is recommended to:
• Choose a safe, level surface, where there will be no danger of over-
turning the appliance or being injured;
• Choose a location that is suffi ciently well-lit, clean and near an eas-
ily reachable socket.
• Allow for a minimum distance from the sides of the machine as
shown in the fi gure.
4
Insert the drip tray with grill into the machine. Make sure it is fully
inserted.
Note:
The drip tray collects the water that comes out of the coff ee dispensing
spout during each rinse/self-cleaning cycle, as well as any coff ee that
might be spilled during beverage brewing. Empty and wash the drip tray
daily and each time the full drip tray indicator is raised.
Caution:
NEVER remove the drip tray when the machine has just been turned
on. Wait a couple of minutes for the machine to carry out a rinse/self-
cleaning cycle.