2
Remove the Classic Milk Frother from the steam/hot water wand.
3
Press the "
" button.
Note:
If you press the "
" button by mistake, press the "
4
Remove the "INTENZA+" water fi lter (if any) from the water tank and
replace it with the small white original one.
Pour all the descaling solution into the water tank.
5
Fill the water tank with fresh water up to the CALC CLEAN level and put
it back into the machine.
6
Place a large container (1.5 l) under both the steam/hot water wand
and the dispensing spout.
ENGLISH
43
43
" button to quit.