Feed Roller Parameters - Pfaff 8310-041 Instruction Manual

11

Feed roller parameters

.03.02
In this menu the relevant parameters for the feed rollers are preset.
Switch on the machine.
●
Enter the input mode.
●
Call up further settings.
●
Call up the menu for entering the feed roller parameters.
●
Description of the functions
Input mode
This function is used to change from the initial state to the input mode.
Further settings
This function calls up the menu for entering further settings again.
Sealing mode
This function is used to change to the sealing mode.
Acceleration and brake profiles
This function is used to enter the values for the corresponding acceleration or brake profiles.
Feed roller pressure limit
This function is used to enter the maximum permissible value for the feed roller pressure.
Basic position of the top feed roller
This function is used to select the basic position of the top feed roller. The basic position of
the feed roller can be raised or lowered.
Size of the feed difference
This function is used to stipulate the size of the feed difference of the feed rollers (only with
the triple foot switch, which is available as an option)
Input
59