Selection Switch For The Operating Direction; Lever For Engaging The Hot Wedge - Pfaff 8362-004 Instruction Manual

Controls
7

Selection switch for the operating direction

.06
7

Lever for engaging the hot wedge

.07
7 - 4
1
Fig. 7 - 06
1
Fig. 7 - 07
● The operating direction of the feed rollers
can be selected by pressing switch 1.
Top position:
Feed rollers run forwards (for
heat sealing)
Middle position:
Feed rollers are standing still
Bottom position:
Feed rollers run backwards (for
grinding in the hot wedge)
● The hot wedge can be engaged and
disengaged with lever 1.
When disengaging the hot
wedge, take care to see that
lever 1 clicks into position.
The adjacent illustration shows
the standard machine version
(PFAFF 8362-004).