Other Peripheral Equipment Applicability - Mitsubishi FX3G SERIES User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
5.6

Other Peripheral Equipment Applicability

5.6.1 Other Peripheral Equipment Applicability
Model name
GOT1000 Series
F940WGOT
F940GOT F940 Handy GOT Not available
F930GOT(-K)
F920GOT(-K)
ET-940
FX-10DM(-SET0)
FX-10DU
*1. The F940GOT and ET-940 whose version is former than Ver.1.10 do not support the transparent (2-
port) function of the GX Developer.
52
Applicability
This series is compatible with the FX
used.
GT15 and GT11:
Standard monitor OS[03.14.**]or later
Communication driver MELSEC-FX[03.14.**]or later
Option OS List editor for MELSEC-FX[03.14.**]or later
GT10:
Standard monitor OS[01.10.**]or later
Communication driver MELSEC-FX[01.06.**]or later
Applicable
This series is subject to the following restrictions when connected using unsupported
standard monitor OS, communication driver or option OS.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
and program sizes available in the FX
• The list editor function for MELSEC-FX is not available. When using the list editor
function for MELSEC-FX, upgrade the standard monitor OS, communication driver and
option OS to the version compatible with the FX
Check the applicability of other items in the GOT manual.
The following restriction applies when connected.
Not available
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
Not available
and program sizes available in the FX
Not available
Not available
For connection using the 2-port interface function
The following restriction applies when connected.
Contents of restrictions
• Programming is enabled only in the function ranges such as instructions, device ranges
Not available
and program sizes available in the FX
The following restriction applies when connected.
Contents of restrictions
It is limited to the device range and function range supported by the highest class model
Not available
(FX or FX
1N 2N
5 Version Information and Peripheral Equipment Connectability
5.6 Other Peripheral Equipment Applicability
Remarks
PLC when GT Designer2 Ver. 2.85P or later is
3G
1N and FX
and FX
1N
→ For applicable models, refer to the GOT manual.
and FX
1N
→ For supported models and device ranges, refer to the FX-
) applicable in the product version.
→ For supported models and device ranges,
refer to the FX-10DU-E/FX-20DU-E User's Manual
1NC PLCs.
PLC.
3G
PLCs.
1NC
*1
, refer to Section 5.5.
PLCs.
1NC
10DM USER'S MANUAL
(Manual No. JY992D86401).
(Manual No. JY992D54801).