Chapter/Track/Title Repeat Playback; Switching The Audio Tracks; Video Cds With Multiplex Audio; Switching The Angle (Dvd Only) - Alpine DVE-5300 Owner's Manual

Chapter/Track/Title Repeat Playback

Use this function to play the disc's titles, chapters or tracks repeatedly.
During playback, press REPEAT.
The repeat mode switches each time the button is pressed.
DVD
Chapter
The chapter is played repeatedly.
(RPT CHAPTER)
Title
The title is played repeatedly.
(RPT TITLE)
Off
The mode returns to normal
(RPT OFF) playback. (Factory default)
VIDEO CD
Track
The track is played repeatedly.
(RPT TRACK)
Playback does not repeat.
Off
(Factory default)
(RPT OFF)
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Press MENU to turn the PBC function off.
• For some discs it is not possible to switch the repeat mode.

Switching the Audio Tracks

DVDs can have up to 8 different audio tracks. These alternate tracks can
be switched during playback.
During playback, press AUDIO.
The sound switches between the alternate audio tracks
recorded on the disc each time the button is pressed.
• The selected alternate track becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc's default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.

Video CDs with multiplex audio

During playback, press AUDIO.
The left and right channels will be output as shown in the figure
below, each time the button is pressed.
LR LL RR LR
14
-EN

Switching the Angle (DVD only)

On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc
each time the button is pressed.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
Switching the Subtitles (subtitle
language) (DVD only)
With multiple subtitle language DVDs, the subtitle language can be
switched during playback, or subtitles can be hidden.
During playback, press SUBTITLE.
The subtitle switches between the languages recorded on the
disc and OFF each time the button is pressed.
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVD's menu.
• The selected subtitle language becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc's default language is selected instead.
• For some discs, the subtitles will be displayed even when this is set to
off.
Tips
Switching from the disc menu
For some discs, the audio language, angle and subtitles can be
switched from the disc menu.
1 Press MENU, select the item, then press ENT.
2 Press , , or
then press ENT.
(For some discs, they can be selected using the
number keys ("0" to "9") while the language or the
angle menu is displayed.)
to select the language or angle,