User's Guide
Running Web Config on a Web Browser
1. Check the printer's IP address.
Hold down the
button for at least 10 seconds to print the network status sheet, and then check the
printer's IP address.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the maintenance screen of Epson iPrint.
Related Information
"Printing Using Epson iPrint" on page 53
&
Running Web Config on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Config.
1. Access the devices and printers screen in Windows.
❏ Windows 10
Right-click the start button or press and hold it, and then select Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
❏ Windows Vista
Click the start button, and select Control Panel > Printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3. Select the Web Service tab and click the URL.
Running Web Config on Mac OS X
1. Select System Preferences from the
then select the printer.
Network Service and Software Information
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
86