Sony PXW-FS7M2 Operating Instructions Manual page 62

000 62
5. Menu Display and Settings: Setup Menu List
Video >Monitor LUT
Sets monitor LUT settings. Available only when shooting in Cine EI mode.
Item Sub-item setting
User 3D LUT User 3D-1
Select User 3D-2
User 3D-3
User 3D-4
SDI1 & Internal MLUT On / MLUT Off
Rec
SDI2 MLUT On / MLUT Off
MLUT Off
HDMI MLUT On /
Viewfinder MLUT On / MLUT Off
Video >Output Display
Sets output signal settings.
Item Sub-item setting
SDI2 On / Off
HDMI On / Off
VF Menu
VF >VF Setting
Sets viewfinder settings.
Item Sub-item setting
Brightness –99 to +99 (±0)
Color Mode Color / B&W
Description
Selects the type of user 3D LUT.
Selects whether to apply monitor LUT to the
SDI OUT1 output video and the video
recorded on XQD memory cards.
Selects whether to apply monitor LUT to the
SDI OUT2 output video.
Displays whether monitor LUT is applied to
the HDMI output video.
[Tip]
This setting follows the HDMI Target Device setting
(page 85).
Selects whether to apply monitor LUT to the
viewfinder output video.
Description
Selects whether to superimpose menus and
status on the SDI output signal and HDMI
output signal.
Description
Adjusts the brightness of the viewfinder
image.
Selects the display mode of the viewfinder in
E-E/recording mode.
VF >Peaking
Sets peaking settings.
Item Sub-item setting
Setting On / Off
Normal
Peaking Type / Color
Frequency Normal / High
Normal 0 to 99 (50)
Peaking Level
Color B&W / Red / Yellow / Blue
Color Peaking 0 to 99 (50)
Level
VF >Zebra
Sets zebra pattern settings.
Item Sub-item setting
Setting On / Off
Zebra Select 1 / 2 / Both
Zebra1 Level 0% to 107% (70%)
Zebra1 1% to 20% (10%)
Aperture Level
Zebra2 Level 0% to 109% (100%)
VF >Marker
Sets marker display settings.
Item Sub-item setting
On
Setting / Off
Color White / Yellow / Cyan / Green / Magenta / Red
/ Blue
Center Marker 1 / 2 / 3 / 4 / Off
Safety Zone On / Off
Safety Area 80% / 90% / 92.5% / 95%
Aspect Marker Line / Mask / Off
Aspect Mask 0 to 15 (12)
Aspect Safety On / Off
Zone
Description
Turns the peaking function on/off.
Selects the peaking type.
Normal: Normal peaking
Color: Color peaking
Selects the peaking frequency.
Sets the normal peaking level.
Selects the color of the color peaking signal.
Sets the color peaking level.
Description
Turns the Zebra function on/off.
Selects the zebra pattern type (Zebra 1,
Zebra 2, Both).
Sets the Zebra 1 display level.
Sets the Zebra 1 aperture level.
Sets the Zebra 2 display level.
Description
Turns the display of all markers on/off.
Selects the marker signal color.
Turns the center marker on/off.
Turns the safety zone marker on/off.
Selects the size of the safety zone marker (as
a percentage of total screen size).
Selects the type of aspect marker.
Sets the level of the video signal outside the
marker.
Turns the aspect safety zone marker on/off.