Table of Contents
Advertisement
000
57
5. Menu Display and Settings: Setup Menu List
Paint >White Clip
Sets white clip adjustment settings.
Item
Sub-item setting
Setting
On
/ Off
Level
90.0% to 109.0%
The default setting varies depending on the
country of purchase.
NTSC Area:
108.0%
PAL Area:
105.0%
Paint >Detail
Sets detail adjustment settings.
Item
Sub-item setting
Setting
On /
Off
Level
–99 to +99 (±0)
H/V Ratio
–99 to +99 (±0)
Crispening
–99 to +99 (±0)
Level Depend
On
/ Off
Level Depend
–99 to +99 (±0)
Level
Frequency
–99 to +99 (±0)
Knee Aperture On /
Off
Knee Aperture
–99 to +99 (±0)
Level
Limit
–99 to +99 (±0)
White Limit
–99 to +99 (±0)
Black Limit
–99 to +99 (±0)
Description
Turns the white clip adjustment function on/
off.
[Notes]
ˎ The setting is reset to On when the camcorder
ˎ
is turned off. To set to Off permanently, set Level
to 109%.
ˎ Cannot be set when Gamma >Gamma Category
ˎ
is set to S-Log2 or S-Log3.
Sets the white clip level.
Description
Turns the detail adjustment function on/off.
Sets the detail level.
Sets the mix ratio between the H detail level
and the V detail level.
Sets the crispening level.
Turns the level dependence adjustment
function on/off.
Sets the level dependence level.
Sets the center frequency of the detail (detail
thickness).
The detail is thinner the higher the center
frequency, and thicker the lower the center
frequency.
Turns the knee aperture correction function
on/off.
Sets the knee aperture level.
Sets the detail limiter for both the white-side
and black-side directions.
Sets the white-side detail limiter.
Sets the black-side detail limiter.
Paint >Detail
Sets detail adjustment settings.
Item
Sub-item setting
V Black Limit
–99 to +99 (±0)
Y
V Detail
NAM /
/ G / G+R
Creation
Paint >Skin Detail
Sets skin detail correction settings.
Item
Sub-item setting
Setting
On /
Off
Area Detection Execute / Cancel
Area Indication On /
Off
Level
–99 to +99 (±0)
Saturation
–99 to +99 (±0)
Hue
0
to 359
Width
0 to 90 (40)
Paint >Aperture
Sets aperture correction settings.
Item
Sub-item setting
Setting
On
/ Off
Level
–99 to +99 (±0)
Paint >Matrix
Sets matrix correction settings.
Item
Sub-item setting
On
Setting
/ Off
Description
Sets the black-side V detail limiter.
Sets the signal source for creating the V
detail to NAM (G or R, whichever is higher), Y,
G, or G+R.
Description
Turns the skin detail correction function on/
off.
Detects the color used for skin detail
correction.
Execute: Run detection
Turns the function that displays zebra in
areas of the color used for skin detail
correction on/off.
Sets the skin detail level.
Sets the saturation of the color targeted for
skin detail correction.
Sets the hue of the color targeted for skin
detail correction.
Sets the range for the hue of the color
targeted for skin detail correction.
Description
Enables/disables aperture correction
(processing that improves resolution by
adding a high-frequency aperture signal to
the video signal to correct deterioration due
to high-frequency characteristics).
Sets the aperture correction level.
Description
Turns the matrix correction function on/off.
Hide quick links:
Advertisement
Table of Contents
