Configuring The Tunnel Policy Applied To L2Vpn (Select-Sequence) - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - VPN
---------------------------------------------------------------------
policy1
Run the display ip vpn-instance verbose command, and you can view the tunnel policy applied
to VPN instances. For example, in the following information, you can see that VPN instance
vpna uses tunnel policy policy1.
[Quidway] display ip vpn-instance verbose
Total VPN-Instances configured : 1
VPN-Instance Name and ID : vpna, 1
Create date : 2004/10/11 16:12:02
Up time : 0 days, 00 hours, 03 minutes and 07 seconds
Route Distinguisher : 100:1
Export VPN Targets :
Import VPN Targets :
Label policy: label per route
Tunnel Policy : policy1
The diffserv-mode Information is : uniform
The ttl-mode Information is : uniform
Interfaces : Vlanif10
Run the display ip routing-table vpn-instance verbose command, and you can view the tunnel
that transmits the VPN routes. The following is an example:
[Quidway] display ip routing-table vpn-instance vpnb 10.4.1.0 verbose
Routing Table : vpnb
Summary Count : 2
Destination: 10.4.1.0/30
RelayNextHop: 0.0.0.0
RelayNextHop: 0.0.0.0
Tunnel ID: 0x10005
Run the display tunnel-info tunnel-id command, and you can obtain detailed information about
a specified tunnel.
[Quidway] display tunnel-info 0x10003
Tunnel ID:
Tunnel Token:
Type:
Destination:
Mask:
Out Slot:
Instance ID:
Interface:
Sub Tunnel ID:
1.5 Configuring the Tunnel Policy Applied to L2VPN
(Select-Sequence)
This section describes how to configure tunnel policies in select-sequence mode and how to
apply the tunnel policies to an L2VPN in SVC, Martini, or Kompella mode.
1.5.1 Establishing the Configuration Task
1.5.2 Configuring the Tunnel Policy
1.5.3 Applying the Tunnel Policy on VLL
Issue 03 (2009-08-20)
Protocol: BGP
Preference: 255
NextHop: 2.2.2.2
State: Active Adv GotQ
Tag: 0
Label: 107520
Tunnel ID: 0x10003
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
LSP
100:1
100:1
Process ID: 0
Cost: 0
Neighbour: 2.2.2.2
Age: 01h02m27s
Priority: 0
QoSInfo:0x0
Interface: Tunnel1/0/1
Interface: Vlanif10
0x10003
7
cr lsp
3.3.3.3
0.0.0.0
1
0
Tunnel1/0/1
0x0
1 VPN Tunnel Management
1
1-11