ABB PQFS Installation, Operation And Maintenance Instructions page 168

Reactive power
Load balancing
Setting possibilities
Start and stop settings
Digital inputs
Digital outputs
Alarm contact
Filter losses (maximum values)
– Unit rating: 30 A
– Unit rating: 45 A
– Unit rating: 60 A
– Unit rating: 70 A
– Unit rating: 80 A
– Unit rating: 90 A
– Unit rating: 100 A
Phase to earth resistance
Noise intensity
Communication
Programming
Fuse information
Main circuit fuses
Auxiliary circuit fuses:
Main options
PQF-Link software
RS 485 Modbus adapter
168 Technical specifications ç Manual Power Quality Filter PQFS
Static/dynamic
Power factor programmable from 0.6 (inductive) to 0.6 (capacitive)
Off
Phase to phase, phase to neutral (if neutral present), both (if neutral
present)
Main and auxiliary settings functionality.
Three possible filter modes that allow to set different priorities
Local/remote control functionality.
Filter standby functionality.
Auto restart after power outage functionality.
2 multipurpose digital inputs on PQF-Manager.
Vlow: 0 Vdc, Vhigh: 15-24 Vdc, driving current: 13 mA@ 24Vdc (Rint =
1.88 kW).
Can be used to implement remote control functionality, start/stop
buttons and switching between main and auxiliary settings.
6 multipurpose (NO) digital outputs on PQF-Manager.
Maximum continuous ac rating: 440 Vac/1.5 A
Maximum continuous dc rating: 110 Vdc/0.3 A
Common rating: 9A/terminal, totaling 18 A
Can be used to monitor the filter state (e.g. filter on/off or specific filter
warnings/alarms) and the network state.
1 universal alarm contact with two complimentary outputs (NO/NC) on
PQF-Manager. Triggered by any fault.
Maximum continuous rating: 250 Vac/1.5 A
£ 1.5 kW
£ 1.8 kW
£ 2.1 kW
£ 2.6 kW
£ 2.9 kW
£ 3.2 kW
£ 3.5 kW
1.44 MW/filter unit
67 dBA typically
Through PQF-Manager display.
Through Modbus RTU (with optional adapter).
Through RS-232 port with dedicated optional software (PQF-Link).
Through PQF-Manager display.
Through RS-232 port with dedicated optional software (PQF-Link).
Not included
French Ferrule 10 x 38 gG/gl, 6A, 500V, Isc ~120kA