Manual Channel Search - Philips BDS4222B User Manual

User Manual BDS4222B/V/R
7.9.2

MANUAL CHANNEL SEARCH

You may also make a manual search, in case, some channels are not
stored during the initial set up.
1 Press the MENU key on the monitor panel or remote control.
2 Use the ADJ or ADJ
menu.
3 Use the SEL or SEL
option.
4 Press the ADJ or ADJ
=> The MANUAL SEARCH menu is now displayed.
5 Select the Standard option.
6 Select the signal system then use the ADJ
search the frequency based on the current frequency shown on the
menu. Or you can just key in the frequency with number key on the
remote control.
=> When a channel is found, the Save on CH option will be flashing
with red color.
7 Press OK key to confirm the channel which is searched.
42
key to select the TV option from the
key to select the MANUAL SEARCH
key to confirm the selection.
or ADJ key to