Picture-In-Picture (Pip) / Side-By-Side Picture (Pop) - Philips BDS4222B User Manual

PIP Mode
S: AV
M: TV
POP Mode
S: AV
M: TV
POP 4:3 Mode
Main Sub
Picture Picture
POP 16:9 Mode
Main Sub
Picture Picture
7.1.2
PIP and POP modes allow you to view two video input sources
simultaneously.
Turning On PIP or POP Mode
1 Press the PIP key once on the remote control to activate PIP mode.
2 Press the PIP again to switch to POP mode.
3 Press the PIP key sequentially will cycle between:
PIP mode:
Input source for
In PIP mode, a small window is displayed in one of the four corners.
Main picture
The OSD on the upper right corner will denote the input selected for
Input source for
main picture (large screen) and the sub-picture (small screen) displayed.
Sub picture
Notes:
Sub picture
●
Once PIP is turned off, the next time you return on PIP mode, the
position of the subwindow will start at default position.
●
Main picture
In PIP mode it is not possible to combine video input (e.g. TV, AV, S-
Video) with data input (e.g. DVI, RGB(VGA)).
POP mode:
Input source for
In POP mode, the screen will be split in half. The screen on the left side
Main picture
is the main picture and the screen on the right is the sub-picture. The
Input source for
OSD on the upper right corner will denote the input signal source for
Sub picture
both the main and sub-pictures.
Sub picture
There are two Side-by-Side picture modes available in addition to the
standard POP mode:
Main picture
■
POP (4:3) mode will display both main and subpicture in a 4:3 aspect
ratio within the POP windows.
■
POP (16:9) mode will display both main and sub-picture in 16:9
aspect ratio within the POP windows.
PICTURE-IN-PICTURE (PIP) / SIDE-BY-SIDE
PICTURE (POP)
29
User Manual BDS4222B/V/R