Built-In Amplification (Speaker); Fixed / Variable Audio Output - Philips BDS4222B User Manual

7.2.2

BUILT-IN AMPLIFICATION (SPEAKER)

Turning On Built-in Amplification
This monitor is equipped with a built-in amplication for optional external
speakers. You can switch the amplification ON or OFF using the OSD.
Because these speakers are general purpose, you may consider switching
them OFF during hi-fidelity playback of movies or other content.
1 Press the MENU key on the monitor panel or remote control.
2 Use the ADJ or ADJ
the menu.
3 Use the SEL or SEL
option.
4 Press the ADJ or ADJ
5 Press the EXIT key to close the OSD screen, or press the SEL
SEL key to keep adjusting.
7.2.3

FIXED / VARIABLE AUDIO OUTPUT

Setting Output Using OSD Menu
You can set the type of output this monitor outputs from its rear panel
audio output jacks. By using OSD menu, you can easily choose between
variable or fixed audio outputs.
1 Press the MENU key on the monitor panel or remote control.
2 Use the ADJ or ADJ
the menu.
3 Use the SEL or SEL
option.
4 Press the ADJ or ADJ
When set to VARIABLE, the audio output is affected by the
●
monitor's internal audio controls.
When set to FIXED, the audio output bypasses the monitor's
●
internal audio controls.
5 Press the EXIT key to close the OSD screen, or press the SEL
SEL key to keep adjusting.
35
User Manual BDS4222B/V/R
key to select the SOUND option from
key to select the INTERN. SPEAKER
key to change the setting (ON/OFF).
key to select the SOUND option from
key to select the AUDIO OUTPUT
key to change the setting:
or
or