Table of Contents
Advertisement
13
Baseband Noise Measurement Examples
Baseband Noise with Test Set Measurement Example
This measurement example will help you measure the noise voltage of a
source.
To ensure accurate measurements allow the DUT and measurement equipment to warm up
NO T E
at least 30 minutes before making the noise measurement.
Defining the measurement
1
2
3
e5505a_user_select_param_def_file_BBnoise
27 Jun 04 rev 3
Figure 249 Select the parameters definition file
4
314
From the File menu, select Open.
If necessary, choose the drive or directory where the file you want is stored.
In the File Name box, choose "BBnoise_with_testset.pnm." See
Click the Open button. The appropriate measurement definition
parameters for this example have been pre-stored in this file.
page 317) lists the parameter data that has been entered for this
measurement example.
Figure 249
(Table 49
on
Agilent E5505A User's Guide
Advertisement
Table of Contents
