Table of Contents
Advertisement
14
Baseband Noise Measurement Examples
Baseband Noise using a Test Set Measurement Example
Baseband Noise using a Test Set Measurement Example
Defining the
Measurement
14-2
E5500 Phase Noise Measurement System Version A.02.00
This measurement example will help you measure the noise voltage
of a source.
NOTE: To ensure accurate measurements, you should allow the UUT
and measurement equipment to warm up at least one hour before
making the noise measurement.
1
From the File menu, choose Open.
2
If necessary, choose the drive or directory where the file you
want is stored.
3
In the File Name box, choose "BBnoise_with_testset.pnm." See
Figure
14-1.
Figure 14-1 Select the Parameters Definition File
4
Choose the OK button. The appropriate measurement definition
parameters for this example have been pre-stored in this file.
(Table
14-1) lists the parameter data that has been entered for
this measurement example.
Document Part No. E5500-90024 Ed. 1.0
Advertisement
Table of Contents
