Rotary Switch Positions For Measurements - Fluke 787 User Manual

787
Users Manual
No. Position
Meter off
OFF

Default: measure
V A

ac V
F
Frequency counter
Measure dc V
d V

Measure dc mV
d mV

Default: measure Ω
O

T for continuity
BLUE D test
High test lead in
mA A L

cA: measure A dc
BLUE selects ac
High test lead in
dmA: measure mA
dc
10
info@Fluke-Direct.com
Table 3. Rotary Switch Positions for Measurements
Function(s)
M Selects a MIN, MAX, or AVG action (see pg. 18)
KSelects a fixed range (hold 1 second for auto range)
I Toggles TouchHold
C Toggles relative reading (sets a relative zero point)
Same as above
Same as above
Same as above, except diode test has only one range
Same as above, except there is only one range for each input jack
position, 30 mA or 1A
Fluke-Direct
Pushbutton Actions
.com
1.888.475.5235