Cisco SCE 8000 Installation And Configuration Manual page 205

Appendix C Cisco Service Control Engine System Log Messages
Error Message %LOCAL7-6-
Explanation
request.
Recommended Action
Error Message %LOCAL7-6-
change to <%s>"
Explanation
to shutdown or no-shutdown.
In this message, number indicates the slot number, and state indicates shutdown or no-shutdown.
Recommended Action
Error Message %LOCAL7-6-
Explanation
In this message, slot-number indicates the slot number, and state indicates the linecard state: enabled
or disabled.
Recommended Action
Error Message %LOCAL7-6-
Explanation
In this message, zone indicates the time zone, and num indicates the minutes.
Recommended Action
Error Message %LOCAL7-6-SET_CLOCK:"System clock set to GMT-time."
Explanation
and the Traffic Processor.
In this message, GMT-time indicates the time in GMT format.
Recommended Action
SHUTDOWNCC_CALLED:"Shutting down the box per user request."
This message is displayed when the Cisco SCE 8000 platform is shut down on a user's
None.
START_SHUT_NO_SHUT:"Starting Line Card on slot slot-number state
This message is displayed when the user information for a linecard slot state is changed
None.
LINECARD_SHUTDOWN_STATE: "Linecard on slot slot-number is state."
This message is displayed to indicate the state of a linecard: enabled or disabled.
None.
SET_TIME_ZONE:"Time zone set to zone num minutes."
This message is displayed to indicate the time zone set in the system.
None.
This message is displayed to indicate that the system clock is updating the GMT time
None.
Informational Messages, Severity Level 6
Cisco SCE8000 GBE Installation and Configuration Guide
C-9