Spa Installation And Removal - Cisco SCE 8000 Installation And Configuration Manual

Chapter 9 Removal and Replacement Procedures

SPA Installation and Removal

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
Warning
touch the backplane with your hand or any metal tool, or you could shock yourself.
Statement 94
SPAs can be inserted or removed independently from the SIP. Removal of a SIP with installed SPAs is
also supported.
Figure 9-17
Figure 9-17
Table 9-1
This number
1
2
illustrates how to install and remove a SPA in the Cisco SCE 8000-SIP.
SPA Installation and Removal
76 00 -S
IP -40 0
SP A INT
ER FA CE
PR OC
ES SO R
SP A- 1X
10G E-L
-V2
SP A- 1X
10G E-L
-V2
2
Componet Indications
1
Indicates this component
Cisco SCE 8000-SIP
1X10 GBE SPA module
Cisco SCE8000 GBE Installation and Configuration Guide
SPA Installation and Removal
9-31