Dry Ironing; Steam Ironing - Sunbeam Steam Master GCSBCL-212-033 Instruction Manual

To
FILL THE WATER RESERVOIR
(use tap water)
1. Set the Steam Lever to
qjp
(Dry) and the Fabric-Select Dial to OFF Make sure the iron is
unplugged.
2. Lift the Water Fill Hole Cover.
3. Fill an easy-pour measuring cup with tap water and pour water into iron water reservoir.
Do not fill water reservoir beyond maximum fill level.
WARNING: To prevent the risk of burns, be careful when filling a hot iron with water.
Hot metal parts, hot water and steam can cause injuries.
DRY IRONING
1. Make sure the Steam Lever is turned to the
qjp
(Dry) setting.
2. Plug the cord into a nO-Volt AC outlet.
3. Turn the Fabric Select Dial to the fabric setting you desire. Allow the iron to heat for
2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable,
protected surface.
Note: While the Steam Lever is turned to the
qjp
(Dry) setting, you may still use the SHOT OF
STEAM® or SPRAY MIST® feature, as long as the Fabric Select Dial is set
to
wool, cotton, or
linen. Please make sure the water reservoir is approximately
1;.1
full of water.
STEAM IRONING
1. Follow the instructions for "Filling the Water Reservoir."
2. Plug the cord into a nO-Volt AC outlet.
3. Turn the Fabric Select Dial to the fabric setting you desire. Allow the iron to heat for 2 minutes.
While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
IMPORTANT: When not ironing, always set the Steam Lever to
qjp
(Dry) and the Fabric Select
Dial to OFF
USING THE IRON'S SPECIAL FEATURES
SPRAY MIST® FEATURE
is a powerful water spray mist that dampens the fabric to aid in
removing wrinkles from heavy fabrics and for setting creases.
To
USE THE SPRAY
MI~
FEATURE:
Press the Spray Mist® button firmly.
SHOT OF STEAM® FEATURE
provides an extra burst of steam for deep penetration of
stubborn wrinkles. You can use this feature while Dry or Steam ironing, as long as the Fabric
Select Dial is set to wool, cotton, or linen. The water reservoir must be approximately
1
14 full
of water.
To
USE THE SHOT OF STEAMQ';> FEATURE:
Place the iron on top of the wrinkle and press the
Shot of Steam® button each time you would like an extra burst of steam. The Shot of Steam®
feature may be used continuously in approximately 3-second intervals.
VERTICAL STEAM
allows your iron to function as a garment steamer.
Tip: When using vertical steam on clothing, hang the clothing on a clothes hanger for best results.
Hanging curtains and drapes may also be steamed.
To
USE VERTICAL STEAM
(select models only):
1. Make sure that the iron has heated up (2 minutes).
2. Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam.
3. With your other hand, pull the fabric tight.
4. Press the Shot of Steam® button in approximately 3-second intervals as you move the iron
acros& the wrinkled area.
WAR NG: To prevent the risk of burns, keep your hand away from the area being steamed.
WARNING: DO NOT steam garments while wearing them; this may result in injuries.