Kenwood KDC-X301 Instruction Manual page 17

SiriusXM® Radio
(for
Start listening
1 Press repeatedly to select SIRIUS XM.
2 Press repeatedly to select a band.
3 Press .
" " lights up.
4 Turn the volume knob to select a category, then press the
knob.
If "ALL CHANNELS" is selected, all the available channels will
be shown.
5 Turn the volume knob to select a channel, then press the
knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel
rapidly.
If a locked channel or a mature channel is selected, a pass
code input screen appears. Enter the pass code to receive the
channel. ( 14)
To change the tuning method for S / T: Press
Each time you press , the tuning method switches
between "CHANNEL" (manually search for a channel) and
"PRESET" (searches for a preset channel of the selected band).
Direct Access Tuning
(using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a channel number.
3 Press to start searching.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
Access Tuning is automatically canceled.
/ )
Press and hold
(Default: Channel keymode)
"
When channel keymode is selected...
When replay keymode is selected...
.
2
, Direct
SiriusXM Keymode
to change the keymode (channel or replay).
" lights up when replay keymode is selected.
To On the faceplate
Select a channel Press S / T.
Change a channel Press and hold S / T.
rapidly
Store a channel of the Press and hold one of the
current band number buttons (1 to 6).
Select a stored Press one of the number buttons (1 to 6).
channel of the current
band
To On the faceplate
Playback/pause
Press
Select a track Press S / T.
Rewind/Fast-forward Press and hold S / T.
Go to Live Press 1.
On the remote control
Press S /
Press and hold S /
.
(Not available)
On the remote control
. Press
Press S /
Press and hold S /
.
ENGLISH
.
.
.
13