Cisco Nexus 9372TX Hardware Installation Manual page 12

Overview
Note
The following figure shows the switch features on the port side of the chassis.
1 Beacon (BCN), Status (STS), and Environment (ENV) LEDs
2 10GBASE-T downlink ports (48) supporting 100-Megabit,
1-Gigabit, and 10-Gigabit Ethernet
3 40-Gigabit QSFP+ uplink ports (6) supporting 10- and
40-Gigabit Ethernet
To determine which transceivers, adapters, and cables are supported by this switch, see the
Modules Compatibility Information
The following figure shows the switch features on the power supply side of the chassis.
Cisco Nexus 9372TX and 9372TX-E NX-OS Mode Switches Hardware Installation Guide
2
All fan modules and power supplies must use the same airflow direction during
operations. If you are using the 1200-W HVAC/HVDC power supply, the power supply
automatically uses the same airflow direction as used by the other modules in the switch.
document.
Overview
4 Screw holes for mounting
brackets
5 Grounding pad
Cisco Transceiver