Driving Motor - Janome 1600P Servicing Manual

(1)
(2)
(4)
(3)
(2)
(5)

6. Driving Motor

To remove:
[1] Remove the belt cover and motor cover.
[2] Pull out the motor sensor connector (1).
[3] Pull out the motor connector (2), while pushing the
connector lock (3).
[4] Remove the nuts (4) and driving motor (5).
NOTE:
Do not disconnect the connectors by pulling on cord.
To disconnect, grasp the connector, not the cord.
(to be continued on next page.)
17