Hitachi WJ200 Series Quick Reference Manual page 15

Reattach the housing partition and terminal cover. (Option board cover is not used in this case.)
NOTE: in above pictures, the length of ground cable is not suitable. To avoid pulling the cable
unintentionally, you need to cut the ground cable to an appropriate length for the distance to the
inverter's grounding terminal and the size of the terminal block, and crimp the cable to the crimp
terminal before using.
Reattached housing partition and terminal
cover
Please put the all wires beneath this
option properly (to prevent rising by
those wiring in future.)
9
Chapter 4 Attachment
Fixed screw