Screen Configurations And Common Items - Mitsubishi Electric AE-200A Instruction Book

6-4-2. Screen configurations and common items

① Tool bar
② Tab (Upper)
(Lower)
③ Target centralized
controller
④ Setting area
Function
Tool bar
①
Tab
②
Target centralized
controller
③
Setting area
④
[Save]
⑤
[Back]
⑥
WT07442X02
Operation method
Operations such as to create, save,
load and send the settings files, and to
monitor the status of the settings from the
centralized controller are possible.
Click the tab to switch between setting
screens.
When the upper tabs are switched, the
corresponding lower tabs will be displayed.
Click the tab of which you want to make the
settings.
From the list of the centralized controllers
with connection configuration set, select
one to make the settings.
Settings are required for each centralized
controller.
The area in which settings are made.
Click to save the settings in the Initial
Setting Tool.
Click to display the previous settings without
making any changes.
⑤ [Save]
Refer to section 6-4-3 "List of tool bar
operations".
When the "tab" of which you want to make
the settings is clicked, settings screen will be
displayed. Enter the settings data and then
click [Save].
Depending on the settings screen, this may
not be displayed.
Refer to sections 6-5 "Basic settings", 6-6 "Unit
settings", and 6-7 "Billing function settings" for
how to make settings.
Even when [Save] is clicked, the settings data
will not be sent to the AE-200/AE-50/EW-50.
After all of the settings are completed, click
[Send settings] in the tool bar to send it to the
AE-200/AE-50/EW-50. Refer to section 6-4-3
[5] "Send" for details. Note also that even when
saved, the settings are still not been saved in
a settings file. To save a settings file, click [File]
> [Save] or [Save As...] in the tool bar.
62
⑥ [Back]
Description