7-2-2. Unit-related item sheet
There will be 1 unit sheet for each AE-50/EW-50.
[1] Outdoor/indoor unit settings
Check that there are no errors in the settings.
①
① Floor No., Floor name
From [Monitor/Operation] > [Floor] on the AE-200's
LCD, enter the floor number and name, and then
check that there are no incorrect settings.
② Outdoor unit address
③ Outdoor unit model name
④ Outdoor unit standby electric power
⑤ Indoor unit address
⑥ Indoor unit type
⑦ Indoor unit model name
⑧ Indoor unit (Cooling capacity, Fan power
consumption, Standby electric power)
⑨ Indoor unit WHM*
Check that this is correctly entered on the electricity
meter connected to the indoor unit.
⑩ Outdoor unit WHM*
Check that this is correctly entered on the electricity
meter connected to the outdoor unit.
WT07442X02
[1]
②
③
[2]
④
⑤
⑥
*
For a PI controller
1-1-050-1
Ⓐ
For a built-in Pulse Input (PI)
1-1-1
Ⓐ Ⓒ
105
⑦
⑧
Expansion controller No.
Ⓐ
Ⓑ Ⓒ
Ⓑ
Unit address
Ⓒ
CH No.
⑨
⑩