Timer Operation - Sharp AU-PNX11 Operation Manual

TIMER OPERATION

TIMER OFF - SLEEP MODE
1
Press the TIMER OFF button
and set the time as desired.
• The orange TIMER lamp (
up.
• The time setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
off.
NOTE:
• Timer duration can be set from a minimum half an hour to a maximum of 12 hours. Up to 9.5 hours,
you can set in half-hour increments, and from 10 to 12 hours, in 1-hour increments.
• The TIMER OFF and TIMER ON can not be set together.
• The LAUNDRY operation has priority over the TIMER ON operation.
• When the temperature is set during timer setting, the temperature will show in the display for 5 sec-
onds and then return to the timer display.
• If a power failure occurs while the TIMER is set, the TIMER setting will be cancelled and will not be
retrieved even after the power is restored.
TIMER OFF - SLEEP MODE
• When the TIMER OFF is set, the unit automatically adjusts the temperature setting to prevent
excessive cooling while you are in sleep. One hour after the TIMER OFF is set, the unit gradually
raises the temperature setting by 1°C by repeated ON/OFF operation for your comfortable sleep.
TIMER ON
• The unit will turn on prior to the set time to allow the room to reach the desired temperature by the
programmed time. (Awaking function)
AH-PNX11_EN.indd 9
TIMER ON
1
Press the TIMER ON button and
set the time as desired.
) will light • The orange TIMER lamp (
up.
• The time setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
) will turn • The orange TIMER lamp (
off.
1
CANCEL
EN-9
) will light
) will turn
1
CANCEL
11.3.17 4:02:16 PM