Gentle Cool Air; Plasmacluster Operation - Sharp AU-PNX11 Operation Manual

GENTLE COOL AIR

The vertical airflow louvre is set obliquely
upward to deliver cool air to the ceiling in
order to avoid direct airflow.
1
During operation, press the
GENTLE COOL AIR button.
• The remote control will display "
TO CANCEL
Press the GENTLE COOL AIR button
again.
NOTE:
• If you want GENTLE COOL AIR operation in
SUPER JET mode, press GENTLE COOL
AIR button during SUPER JET operation.
AH-PNX11_EN.indd 7

PLASMACLUSTER OPERATION

Plasmacluster ions released into the room
will reduce some airborne mold.
1
During operation, press the
PLASMACLUSTER button.
".
• The remote control will display "
• The blue PLASMACLUSTER lamp (
will light up.
TO CANCEL
Press the PLASMACLUSTER button
again.
• The blue PLASMACLUSTER lamp (
will turn off.
1
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
EN-7
".
)
)
1
11.3.17 4:02:15 PM