Viewing Test Results In Memory; Setting Reminder Alarms (Optional); Purpose - Freestyle FREEDOM LITE Owner's Booklet

Hide thumbs Also See for FREEDOM LITE:
Table of Contents

Advertisement

Available languages

Available languages

Viewing Test Results in Memory

Meter memory stores the last 400 test results with time and date. Press
results. The most recent result appears first.
on the display indicates that you are viewing stored test results.
shows the average value of glucose readings from the last 7-, 14-, or 30-days.
on the display indicates that the test result occurred when it was too hot or too
cold to use the meter and may not be accurate. This result is included in 7-, 14-,
and 30-day averages.
a test result of under 20 mg/dL is included in memory as LO.
a test result of over 500 mg/dL is included in memory as HI.
indicates a control solution test result.
29
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
ART22812-003_rev-A.indd 29-30

Setting Reminder Alarms (optional)

c
to scroll through the

Purpose

The purpose of this section is to set up to four reminder alarms to prompt you to test throughout
the day.
Reminder Alarm
Hour
Minutes
1.
m
With the meter off, press and hold
for 3 seconds until
and 0 is flashing.
2.
c
Press
. Reminder alarm 1 flashes.
Note: You are setting time for Reminder Alarm not clock time.
3.
Set hour
m
Press
to set hour
c
Press
to display correct hour
m
Press
to save
4.
Set minutes
c
Press
to display correct minutes
m
Press
to save
appears
30
11/10/16 11:02 AM

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents