Using Your Meter Memory; Purpose; Viewing Blood Glucose Averages In Memory - Freestyle FREEDOM LITE Owner's Booklet

6.
View result.
The result appears on the display when the test is complete.
(Example only)
7.
Compare the control solution result to the range printed on the test strip vial.
The result should fall within the range.
Note: If you see an "Er1, Er2, Er3, or Er4" on the display, it is an error code. Go to
Error Codes section.
8.
c
Press and hold
the result as a control solution result. To unmark a control solution test result,
c
press and hold
marked this reading as a control solution test.
(Example only)
9.
Remove the test strip to turn meter off.
27
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
ART22812-003_rev-A.indd 27-28
for 2 seconds until appears on the display to mark
for 2 seconds. A value with the indicates you have

Using Your Meter Memory

Purpose

The purpose of this section is to review your stored test results and 7-, 14-, and 30-day averages.

Viewing Blood Glucose Averages in Memory

Start with the meter off (no test strip inserted). Press
appears (control solution, LO, and HI readings not included).
Note: To exit meter memory at any time, press and hold
Example:
Memory Display
your average
n= number of results included in your average
•
c
Press to scroll through 14-, and 30-day averages and all stored test
results. The most recent result appears first.
•
m
Press to scroll backward.
m
. Your 7-day average
m
.
28
11/10/16 11:02 AM