Parameters - GE Digital Energy SG 400 kVA Operating Manual

6.3

PARAMETERS

The parameters mode is entered any time the parameters button is pressed.
The LCD will display a series of screens containing the user parameters, accessible without password
protection.
The buttons perform the following functions:
metering
alarms
parameters
+
–
ok
NOTE !
During parameters mode there is no means to perform scroll back on the display.
Example of operation within parameters mode:
Purpose: to correct a wrong telephone number previously stored in Tel2.
1 – Entering parameters mode (parameters). The first screen is displayed.
1
2 – Scroll to the next screen (+). The second screen is displayed.
2
Modifications reserved
OPM_SGS_USM_M40_M50_1US_V020.doc
Abandon parameters mode and enter metering mode.
Abandon parameters mode and enter alarms mode.
Scroll forward to the next screen.
Scroll forward to the next screen.
Select from the current screen the parameter to edit.
Start the editing for the currently selected parameter.
metering
alarms
Date:
Time:
parameters
metering
PROTOCOL SETUP
Modem enabled=N
alarms
Init=BEQV1X3&D0S0=2
Alarm= N
parameters
DATE AND TIME
D M Y
01.01.2006
12:45:07
Delay=22s
+
–
ok
+
–
ok
Page 26/86
Operating Manual SG Series 400 & 500 kVA