Sceptre E325 SERIES User Manual page 8

GENERAL FUNCTION BUTTONS (Version 2)
POWER – Turns the display on or off.
1.
INFO – Shows the display info.
2.
NUMBER BUTTONS (0-9) – Press 0-9 to select a TV channel directly when you are
3.
watching TV. The channel will change after 2 seconds. For switching DVD chapters over
100 the 0 button acts as the 100 button, so press the 0 button twice to get that chapter.
(-) – Inserts the dash for selecting digital channels directly.
4.
R – Returns to the previous channel. For switching DVD chapters over 100 the R button acts
5.
as the 100+ button, so press the R button and the number you want to switch to. For
example for chapter 125 you would press R and 2 and 5 for the combination of 125.
VOL(+)/VOL(-) – Press the VOL buttons to increase or decrease the sound level.
6.
▲/▼/◄/►/ENTER – These directional buttons allow you to move around in the TV's menu
7.
and the DVD's menu. Press the ENTER button when you want to select a particular option.
CH(+)/CH(-) – Press the CH buttons to switch to the next or switch to the previous channel.
8.
MENU – Brings up the main display menu on the screen.
9.
10. GUIDE – Opens the current digital channel information guide (antenna only).
11. EXIT – Exit the main display menu on the screen.
12. SOURCE – Press this button to cycle through INPUT source.
13. PICTURE – Selects various preset picture settings.
14. MUTE – Turns the sound off from the display. To un-mute either press VOL(+) or press the
MUTE button again.
15. AUTO EJECT – Press this button to open or close the DVD player.
16. D.MENU – Shows the menu of the DVD disc.
17. D.SETUP – Press this button to setup the disc in DVD mode.
18. PREVIOUS CHAPTER – Press this button to select the DVD's previous chapter.
19. REWIND – Press this button to reverse the DVD movie to a previous scene.
20. FAST FOWARD – Press this button to fast forward the DVD to the next scene.
21. NEXT CHAPTER – Press this button to select the DVD movie's next chapter.
22. ►/║ – Play/pause button in DVD mode.
23. ■ – Stop button in DVD mode.
24. REPEAT – Press this button for repeat the program.
The following buttons are functions designed to work with the optional, Sceptre Sound Bar.
25. POWER – This button turns on the sound bar.
26. SOURCE – This button selects the sound bar's source.
27. MODE – This button selects the sound bar's sound modes.
28. VOL(-) – This button decreases the volume of the sound bar.
29. VOL(+) – This button increases the volume of the sound bar.
Please Note:

The remote picture might be different from the actual remote. Please refer to the user manual
on our website http://www.sceptre.com.
(DVD)SR Series P8