Sceptre E325 SERIES User Manual page 3

Ready to Watch Some TV? (Optional)
Starting up the HDTV
1. Make sure your power cable is connected and the standby red light in the front of the
TV is lit up.
2. Check all your connection cables off the side or the back of your TV and also your AV
devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select HOME mode for power saving or VIVID mode for full performance.
5. Select the correct input source according to the Connecting pages.
If You Have Connected Antenna to the TV...
If an antenna or cable (without a cable box) is connected to your TV's tuner, you will need to go
through an INITIAL SETUP process in order to watch the TV.
1. Turn on the TV and select VIVID mode for full performance or HOME mode for power
saving.
Use the ▲ or ▼ buttons to highlight the signal type and press ◄ or ► to select your
2.
connection either AIR or CABLE.
Use the ▲ or ▼ buttons to select AUTO CHANNEL SEARCH and press ENTER to
3.
scan for channels.
4. Once the scanning finishes, you can begin to watch TV.
(DVD)SR Series P3