Honda CR-V 2017 Owner's Manual page 97

Indicator Name
All-wheel drive
(AWD)
Indicator *
Road Departure
Mitigation
(RDM) Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
( w *1 , then goes off.
Comes on if there is a problem
●
with the AWD system.
Blinks when the differential
●
temperature is too high.
Comes on for a few seconds when
●
you set the power mode to ON,
then goes off.
Comes on if there is a problem
●
with the RDM system.
Comes on when the RDM system
●
shuts itself off.
*
Explanation
Stays on constantly - The engine drives
●
the front wheels only in this state. Have
your vehicle checked by a dealer.
Blinks while driving - Stop in a safe
●
place, change to P , and idle the engine
(
until the indicator goes off. If the indicator
does not stop blinking, take your vehicle
to a dealer.
2 Real Time AWD with Intelligent
*
Control System TM P. 502
Stays on constantly - Have your vehicle
●
checked by a dealer.
- Indicator may come on temporarily when
passing through an enclosed space, such as
tunnel.
- The area around the radar sensor is blocked
by dirt, mud, etc. Stop your vehicle in a safe
place, and wipe it off with a soft cloth.
Have your vehicle checked by a dealer if
●
the indicator does not go off even after
you cleaned the radar sensor.
2 Collision Mitigation Braking
System TM (CMBS TM ) * P. 516
uuIndicatorsu
Message *
—
—
Continued 95