Opening And Closing The Windows - Honda CR-V 2017 Owner's Manual

Opening and Closing the Windows

Opening/Closing the Power Windows
The power windows can be opened and closed when the ignition switch is in ON
*1 , using the switches on the doors. The driver side switches can be used to open
( w
and close all the windows.
The power window lock button on the driver side must be switched off (not pushed
in, indicator off) to open and close the windows from anywhere other than the
driver's seat.
When the power window lock button is switched on (pushed in, indicator on), you
can only operate the driver's window. Turn the power window lock button on if a
child is in the vehicle.
■
Opening/Closing Windows with Auto-Open/Close Function
Power Window
Lock Button
Driver's
Window
Switch
Front Passenger's
Window Switch
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
164
■
Automatic operation
ON
To open: Push the switch down firmly.
OFF
To close: Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly.
Indicator
■
Manual operation
To open: Push the switch down lightly, and
hold it until the desired position is reached.
To close: Pull the switch up lightly, and hold it
until the desired position is reached.
1Opening/Closing the Power Windows
WARNING
3
Closing a power window on someone's
hands or fingers can cause serious injury.
Make sure your passengers are away from
the windows before closing them.
The power windows can be operated for up to 10
minutes after you turn the ignition switch off
Opening either front door cancels this function.
Auto Reverse
If a power window senses resistance when closing
automatically, it stops closing and reverse direction.
The driver's window auto reverse function is disabled
when you continuously pull up the switch.
The auto reverse function stops sensing when the
window is almost closed to ensure that it fully closes.
You cannot fully open the rear windows.
*1 .