Honda CR-V 2017 Owner's Manual page 106

uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
●
●
●
●
●
●
●
●
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
104
Condition
Appears when the engine coolant temperature gets
abnormally high.
Appears when you turn the ignition switch to ON
( w *1 without fastening the driver's seat belt.
Appears when there is a problem with the sensor on
the battery.
Appears along with the battery charging system
indicator when the battery is not charging.
Appears if the automatic brake hold is automatically
canceled while it is in operation.
Appears when the automatic brake hold system is
turned off.
Appears when the automatic brake hold button is
pressed without wearing the driver's seat belt.
Appears when the automatic brake hold button is
pressed without depressing the brake pedal while
the automatic brake hold is in operation.
*
Explanation
2 Overheating P. 617
Fasten the seat belt properly before you start to drive.
●
Have your vehicle checked by a dealer.
●
2 Checking the Battery P. 590
Turn off the climate control system and rear defogger to
●
reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 621
Immediately depress the brake pedal.
●
2 Automatic Brake Hold P. 512
Fasten the driver's seat belt.
●
2 Automatic Brake Hold P. 512
Press the automatic brake hold button with the brake
●
pedal depressed.
2 Automatic Brake Hold P. 512