Honda CR-V 2017 Owner's Manual page 617

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order:
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
*1: Models with the smart entry system have an ENGINE START/STOP button
instead of an ignition switch.
* Not available on all models
1What to Do After the Engine Starts
The VSA® and CMBS TM* indicators may come on
when your turn the ignition switch to ON
re-connecting a battery.
Drive a short distance at more than 12 mph (20 km/
h).
Each indicator should go off. If either or both do not,
have your vehicle checked by a dealer.
uuJump Startingu
( w *1 after
615