Resetting The Lpu; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Procedure
l
----End

4.7 Resetting the LPU

This section describes how to reset the LPU.

4.7.1 Establishing the Configuration Task

Before resetting an LPU, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the required data. This helps you complete the configuration
task quickly and accurately.
Applicable Environment
When an LPU fails to be upgraded or is not working properly, reset the LPU.
Pre-configuration Tasks
None.
Data Preparation
To reset the LPU, you need the following data.
No.
1
4.7.2 Resetting the LPU
When an LPU fails to be upgraded or is not working properly, reset the LPU.
Context
When an LPU is not working properly, try to locate and rectify the fault rather than resetting the
LPU directly to avoid service interruption.
Issue 03 (2011-12-29)
Run the display transceiver temperature threshold { current | default } slot subrack-
id/slot-id command to view the upper and lower temperature thresholds for adjusting the
fan speed in the current configuration and default configuration.
Data
Slot number of the LPU to be reset
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Management
46