Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Pre-configuration Tasks
Before backing up electronic labels, ensure that the S9300 and the FTP server are routable.
Data Preparation
To back up electronic labels, you need the following data.
No.
1
2
3
4
4.4.2 Backing Up Electronic Labels
The S9300 can back up electronic labels to the FTP server, TFTP server, or CF card.
Procedure
l
l
l
----End
4.5 Setting the Rotating Speed of a Fan
This section describes how to set the rotating speed of a fan.
Issue 03 (2011-12-29)
Data
Name of the electronic label to be backed up
(Optional) Slot number of the electronic label
(Optional, applicable to backing up the electronic label to the FTP server) Address
of the FTP server, and user name and password
(Optional, applicable to backing up the electronic label to the TFTP server) Address
of the TFTP server
Backing up electronic labels to a CF card
1.
Run:
backup elabel filename slot-id
Electronic labels are backed up to a CF card.
This command can be run in any view.
Backing up electronic labels to an FTP server
1.
Run:
backup elabel ftp ftp-server-address filename username password slot-id
Electronic labels are backed up to an FTP server.
Backing up electronic labels to a TFTP server
1.
Run:
backup elabel tftp tftp-server-address filename slot-id
Electronic labels are backed up to a TFTP server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Management
42