Functions - LG R410A Service Manual

2. Functions

Indoor Unit
Operation ON/OFF by Remote controller
Sensing the Room Temperature
Room temperature control
Starting Current Control
Time Delay Safety Control
Indoor Fan Speed Control
Soft Dry Operation Mode
Airflow Direction Control
• Although the air-conditioner is turned off by a power failure, it is restarted auto-
Auto Restart
Deice (defrost) control (Heating)
Hot-start Control (Heating)
Compact and light design
Low noise
Long life filter
High head Drain pump
High-Ceiling corresponding Function
Central Control(Optional)
Swirl Swing Control
• Room temperature sensor. (Thermistor)
• Maintains the room temperature in accordance with the Setting Temperature.
• Indoor fan is delayed for 5 seconds at the starting.
• Restarting is inhibited for approx. 3 minutes.
• Jet, High, Med, Low, Lolow
• Intermittent operation of fan at low speed.
• The louver can be set at swing up and down automatically.
matically previous operation mode after power supply.
• Both the indoor and outdoor fan stops during defrosting.
• Hot start after defrost ends.
• The indoor fan does not rotate until the evaporator pip-
ing temperature will be reached at 25°C.
• To install a unit is very convenient because of smaller
size than textile.
• The most advanced low-noise design.
• The adoption of turbo fan and round type heat exchang-
er give the quietest operation.
• Long life wrinkle(type) and washable and anti-bacteria
filter is adopted.
• Built-in drain pump automatically drains water.
• A standard drain-head height of up to 700mm is possible.
• According to the height of ceiling, the RPM of indoor fan
motor is selected to increase air reaching distance.
• It is operating individually or totally by central control function.
• It is operating swirl swing
Functions
Service Manual 23