Pdt; Monarch Command; Pdt Command; Pdt Clear Command - HP Integrity RX4640 Operation Manual

Example 4-15

monarch Command

Shell> monarch
Current Preferred
Monarch Monarch
------- ---------
0 0
0 0
To view monarch: fs0 :\ monarch
| Processor
-----------------+-----------
current status |
next boot status |
To set the monarch processor to 1: fs0 :\ monarch 1
| Processor
-----------------+-----------
current status |
next boot status |

pdt

Displays or clears the contents of the Page Deallocation Table.
Syntax
pdt (clear)
Parameters
<clear> clears the pdt
Operation
With no options specified, the command displays the PDT information for the system. The PDT is cleared and
a reboot is required for memory reallocation and safe booting.
Example 4-16

pdt Command

Shell> pdt
PDT Information
Last Clear time: PDT has not been cleared
Number of total entries in PDT:
Number of used entries in PDT:
Number of free entries in PDT:
Number of single-bit entries in PDT:
Number of multi-bit entries in PDT:
Address of first multi-bit error:
Example 4-17

pdt clear Command

Shell> pdt clear
Are you sure you want to clear the PDT? [y/N] y
Shell>
Shell> pdt
PDT Information
Last Clear time: 10/21/01
Chapter 4
Possible Warnings
-----------------
0
0
0
1
x0000000000000000
5:00p
50
0
50
0
0
Utilities
EFI/POSSE Commands
47